Force analysis and kinematic optimization of a fluid valve driven by shape memory alloys
DOI:
https://doi.org/10.31181/rme200101061tKeywords:
Bistable mechanism Shape Memory Alloys Force analysis Parametric optimizationAbstract
The paper describes the design and performs a force analysis of a novel mechanism with bistable action, driven by Shape Memory Alloys (SMA). Based on this analysis, the parameters of the links are determined to minimize the energy costs. The kinematics of the mechanism is described in detail and the moments and forces of the elastic and SMA links acting in the mechanism are determined. The influence of the wire forces is determined by the static equilibrium conditions at the end positions and the driving capabilities. Based on the pre-calculated loads, the choice of materials and the design features, the influence of friction forces have been studied. Parametric optimization of the mechanism was performed using the obtained results.
References
Boudreau, R.,&Nokleby, S. (2012). Force optimization of kinematically-redundant planar parallel manipulators following a desired trajectory. Mechanism and Machine Theory, 56, 138-155.
Conte, F. L., George, G. R., Mayne, R. W., & Sadler, J. P. (2010). Optimum Mechanism Design Combining Kinematic and Dynamic-Force Considerations. J. Eng. Ind, 97, 662-670.
Durango, S., Calle, G.,& Ruiz, O. (2010). Analytical method for the kinetostatic analysis of the second-class RRR Assur group allowing for friction in the kinematic pairs. J. Braz. Soc. Mech. Sci. & Eng., 32, 200-207.
Dynalloy, Inc. (2020) Technical Characteristics of Flexinol Actuator wire http://www.dynalloy.com/tech_ data_wire.php, Accessed June 15 2020.
Kostov, M.S., Todorov, T. S, Milkov, M. J.,&Penev I. R. (2018). Bistable valve actuator, GB 2558616 A, Ap. No: 1700422.7.
Lim, W. B., Yang, G., Yeo, S. H., & Mustafa, S. K. (2011). A generic force-closure analysis algorithm for cable-driven parallel manipulators. Mechanism and Machine Theory, 46, 1265–1275.
Mitrev, R. (2018). Inverse kinematics of construction manipulators with redundant degrees of freedom. Bulgarian Journal for engineering design, 37, 9-21.
Rankers, A. M.&Schrama, H. W. (2002). SAM: Simulation and analysis of mechanisms. In ASME 2002 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, American Society of Mechanical Engineers, 1383–1387.
Turkkan, O.A.,&Su, H. J. (2014). A Unified Kinetostatic Analysis Framework for Planar Compliant and Rigid Body Mechanisms. ASME Proceedings,38th Mechanisms and Robotics Conference Paper No. DETC2014-34736, V05BT08A090.
Zhao,Y., Liu, J, F.,& Huang, Z. (2011). A force analysis of a 3-RPS parallel mechanism by using screw theory. Robotica, 29, 959-965.
Zhang, D., Fengfeng, Xi., Mechefske, C.M.,& Lang S.Y.T (2004). Analysis of parallel kinematic machine with kinetostatic modelling method. Robotics and Computer-Integrated Manufacturing, 20, 151-165.
Zhang D., Zhuming, Bi.,& Beizhi, Li. (2009). Design and kinetostatic analysis of a new parallel manipulator. Robotics and Computer-Integrated Manufacturing, 25, 782-791.
Zhang D.,&Gosselin, C.M. (2002). Kinetostatic Analysis and Design Optimization of the Tricept Machine Tool Family. Journal of Manufacturing Science and Engineering, 124, 725-733.
